Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Forum Administrator

Pages: [1] 2 3
It shows that your bearer network card is not supported. You could check with the steps below to confirm:
  ● Press Windows logo key and "R" key in the same time to open the Run box;
  ● Input cmd and press Enter to open the command box;
  ● Input netsh wlan show drivers in the command box and press Enter;
  ● Check the result if hosted network is supported.
If it is supported, check if it is showing among the network adapters from network and sharing center.
If it is supported but not shown up, you need to update the wireless driver.

Driver Talent / Can't Install Drivers without Buying It
« on: May 27, 2017, 08:15:29 AM »
Some users complained that Driver Talent Free could not install drivers automatically. Here I explain it as below:
Driver Talent Free could scan driver issues and download drivers to your computer but not install the drivers automatically. You can install the downloaded drivers manually or upgrade to Pro. We do this just because our team needs to live and our website and program needs to maintain. Thank you for your understanding.

Driver Talent for Network Card / dni_dne is not installed
« on: May 27, 2017, 08:02:06 AM »
The "dni_dne not installed" issue is caused by incompatible VPN software installed on your computer especially after updating to Windows 10.
Follow the steps below to resolve this problem:
1. Open command box: Press Windows Key and "X" key at the same time.
2. Input "reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /fnetcfg -v -u dni_dne" and press enter.

And also, it is recommended to uninstall the VPN software.
If your network driver is not working, try Driver Talent for Network Card which will download and install network drivers without internet connection.
Download link: Driver Talent for Network Card

Driver Talent / My Driver Talent Reported Code "Used Up" Error!
« on: May 27, 2017, 07:57:32 AM »
Feedback from users:
"I reformatted my computer and now my code don’t work. It reported code used up when I try to activate Driver Talent Pro. I use the code on the same computer."

The code for Driver Talent is designed to associate with specific computers. Take the code for 1 PC as the example, it can be associated with only 1 machine. So if you use this code on another machine, this error will appear.

This error also happens even if you use this code on only one PC, just as the example in the above. It happens mostly because you have multiple disks on your computer. In this case, please contact our support team for help.

If you recently updated drivers and soon after that the issue "SYSTEM_SERVICE_EXCEPTION (asmtxhci.sys) BSOD" occurred, you should roll back to the previous drivers. You could restore it from backup or roll it back from the system under Device Manager.
And please note not to update it until the manufacturers released updated version of those drivers to fix that issue.

Another case that caused this problem is the driver version for US 3.0 Root Hub and USB 3.0 eXtensible Host Controller is not the same. So please check them and correct them if it is the case.

Driver Talent / Device Descriptor Request Failed
« on: May 27, 2017, 07:39:52 AM »
If you meet Unknown USB Device (Device Descriptor Request Failed) error under Device Manager. Try the methods below to fix it:

Method 1: Remove the Power Supply

Method 2: Uninstall the USB Driver in Device Manager

Method 3 : Update the USB Driver

Method 4: Disable Fast Startup

Learn more details here: 4 ways to fix device descriptor request failed issue

Driver Talent / PC is Slow after Windows 10 Creator update?
« on: May 23, 2017, 08:23:42 AM »
Some users have also complained about their PC performing quite slow than before once they’ve installed Windows 10 Creators Update. That may be common in Windows PC. And if you want a quick boost in speed, try cleaning Windows 10 junk, optimize system settings.
Here are some solutions to fix PC slow after Windows 10 Creators update.

1.Optimize Startups

Some programs start automatically when you boot the computer. The aim is to minimize these startups and services.

    Press Ctrl + Shift + Esc keys simultaneously.
    Select Task Manager.
    Select the Startup tab.
    Disable all the unnecessary startups.
    Now click on Disable and select the Services tab.
    Select the Hide all microsoft services checkbox.
    Uncheck all unnecessary services you want to disable.
    Click on Stop.

Note: When you are unsure about optimizing computer’s startup, consider using a third-party solution such as Reginout System Utilities. It will also optimize Windows 10 services, and speed up your Windows 10.

2. Optimize High Startups Impact Process

Removing the unnecessary processes with high startup impact can also help to fix slow boot in Windows 10.

1. Press Ctrl + Shift + Del keys simultaneously and then select Task Manager.

2. Turn to the Startup tab.

4. Right-click the unnecessary startups with high startup impact and then choose Disable.

5. Toggle to the Services tab and select the Hide all Microsoft services checkbox.

6. Uncheck all unnecessary services you want to disable and click on Stop.

3.Change the Boot Time Interval

Try reducing the boot time interval to only 3 seconds. You’ll notice a tremendous improvement in the system performance if you follow this rule.

    Press Windows Key + R.
    Type msconfig and press Enter.
    Click General | Selective startup.
    Select the Load system services and Load startup items checkboxes.
    Select Apply.
    Open the Boot tab.
    Set the Timeout to 3 seconds.
    Click Apply.
    Select Advanced options.
    Choose Maximum processor from the Number of processors.
    Click OK.
    Reboot your PC.

4.Change Power Settings to Speed up Slow Windows 10 Creators PC

Making good use of the Power Options by modifying it can dramatically improve the startup performance to speed up slower Windows 10 Creators Update computer.

1. Press Win + X to open Control Panel and then choose Power Options under the Hardware and Sound category.

2. Select Choose what power buttons do.

3. Open Change settings to view the options that are currently unavailable.

4. Click on Shutdown settings and then tick the Turn on fast startup checkbox.


Bluetooth failure seems is common after Windows 10 update. A couple of things could cause your Bluetooth device to not work, and we’ll talk about them now. First, it won’t hurt if you check if your Bluetooth is enabled. To do so, go to Settings > Devices and check if Bluetooth is toggled on. Also make sure that your Bluetooth device is fully charged and discoverable (this is not exactly a Windows 10-related solution, but it won’t hurt if you check).

And some fast check and solutions also can help you fix Bluetooth Not Available after Windows 10 Update Issue:

Top 1. Update Bluetooth Driver to Fix Bluetooth Not Working in Windows 10

Many ways can help you check and update bluetooth driver in Windows 10. You can use Device Manager, remove bluetooth to allow Windows system reinstall drivers. And I prefer to use the 3rd-party tool like Driver Talent.
Top 2:Try Windows Hardware Troubleshooter

If no solution discussed above worked for you, then as a last resort you can try the built-in Windows Hardware Troubleshooter. To do that, search for “Troubleshooter” in the start menu and then open it.

Top 3. Allow Bluetooth Devices to Connect to This Computer

Can't connect to computer from your Bluetooth enabled device? Make sure you have allowed the Bluetooth devices to connect to your computer. Try the steps below:

1. Go to Control Panel. Click "Hardware and Sound" and "Bluetooth Devices".

2. Click the Options tab.

3. Make sure the "Allow Bluetooth devices to connect to this computer" check box is selected.


OSToto Hotspot / Re: differace between user guide & user PC
« on: May 17, 2017, 08:27:42 AM »
:o Please Help:
look at my photo to see the difference between user guide & user PC:
i don't have :speed meter or timer
i don"t have : blacklist or reset wifi olso in setting no driver, no switch to speed mode !!

can anybody tel me why & what is wrong with my hotspot ?


I am sorry, the latest version has removed those functions you mentioned. We will update them and release another better version ASAP.
Thank your for your support!

OSToto Hotspot / Re: differace between user guide & user PC
« on: May 17, 2017, 08:19:56 AM »
Hello! Could you tell me which page you find the user guides. The program has been updated, the second photos is the latest!

The WannaCry ransomware quite makes the Windows users “wanna cry” those days.
If you don't wanna cry after your computer was attacted by WannaCry, you can use these 5 ways to prevent to Windows 10/8.1/8/8/7XP computer from it.

Way 1. Disable the TCP Ports 445, 135, 138, etc. to Prevent the WannaCry Ransomware
Way 2. Disable Server Service to Protect Your Windows Computer from the Cyberattack

Way 3. Install the Windows Security Patch to Prevent the WannaCry Ransomware
Way 4. Create a System Restore Point to Backup and Protect Your Data
Way 5. Keep Good Habits on Using Your Computer

You can learn more operation details from here:

Driver Talent / Re: New drivers found
« on: May 11, 2017, 08:31:07 AM »
It is our pleasure! If you have any other problems or want to share something about Windows computer for others, welcome to post in this forum! ;D

Windows 10 / Re: My windows 10 is not stable
« on: May 08, 2017, 07:57:56 AM »
Win 10 has a not so good Compatibility. You can try to use Driver Talent to manage drivers in your Windows 10 computer. You can learn more tips about Windows 10 driver here:

Thank you for sharing!!!!

Driver Talent / Re: New drivers found
« on: May 08, 2017, 07:36:23 AM »
Hello!Could you tell me the model of your printer?Itry to help you find in data base! ;D

Pages: [1] 2 3